Waters Network Systems GSM2109-1009-8PoE Especificações

12 OPERATING MANUAL MS1008-2G-4POE/PSX1008-2G-4PoE Switch Managed Switch with Eight 10/100/1000Base-TX Ports Plus One Mini GBIC slot for 10

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 10 eliminating congestion problems inherent with the carrier se

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 100 WATERS NETWORK SYSTEMS’ LIABILITY UNDER THE WARRANTY SHALL

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 101 WILL MAKE REASONABLE EFFORTS TO PROVE COMPATIBILITY, EXCEPT

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 102 THE SALE, INSTALLATION, MAINTENANCE, USE, PERFORMANCE, FAIL

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 11  5.6Gbps switch bandwidth  IGMP snooping  GVRP function

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 12 3.2 Software Features RFC Standard RFC2233 MIBII, RFC 1157

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 13 Port Security Supports ingress and egress MAC address filter

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 14 Configuration upload and download Support binary format conf

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 15 3.3.1 Console and Telnet Management Console Management is d

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 16 Figure 3.2 - Front Panel Rear Panel A three-pronged AC

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 17 3.5 LED Indicators The following table provides the status a

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 18 3.6.1 Attaching Rubber Feet 1. Make sure the mounting surf

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 19 Segment Application For enterprise networks where large data

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 2 Table of Contents 1.0 Specifications ...

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 20 PoE The four-port PoE switch provides power to the powered

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 21 Connecting a Terminal or PC to the Console Port Use the supp

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 22 3. Enter the user name and password. 4. The default us

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 23 5.0 Web Based Management This section covers the functions

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 24 6. The main menu of for web based management will be displa

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 25 Figure 5.2 - System Information Screen 5.4 IP Configuratio

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 26 Figure 5.3 – IP Configuration 5.5 DHCP Server Dynamic Host

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 27  Subnet Mask - The dynamic IP assigned range for subnet ma

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 28 5.6 Port and IP Bindings The switch allows you to assign a

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 29 Figure 5.7 - Update Firmware Screen 5.8 Restore Configurati

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 3 5.10 System Event Log Menu ...

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 30 Figure 5.9 - Backup Configuration Screen 5.10 System Event

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 31 Figure 5.10 – System Log Configuration 5.11 SMTP Configur

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 32  Confirm Password - confirm password  Rcpt email address

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 33 Figure 5.12 - Event Configuration Screen  Port Event Sel

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 34 5.13 SNTP Configuration Use this menu to configure the Simpl

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 35 Local Time Zone Conversion from UTC Time at 12:00 UTC A

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 36 Local Time Zone Conversion from UTC Time at 12:00 UTC S

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 37 5.14 IP Security IP security allows you to assign ten spe

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 38 5.15 User Authentication User authentication is used to modi

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 39 5.17 Port Control Menu The section of this screen is used t

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 4 5.31 Factory Default Settings ...

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 40 To view the status of a single port, click on the port displ

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 41 5.18 Port Trunking The Link Aggregation Control Protocol (L

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 42 Figure 5.19 – Port Trunk Aggregator Setting Once the LACP a

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 43 5.19 State Activity Once the LACP aggregator has been config

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 44 o Both – RX and TX packet  Source port – select the ports

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 45 5.21 Rate Limiting Rate limiting allows you to set up the ba

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 46 5.22 Protocol Menu Options 5.22.1 VLANs Virtual Local Area

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 47 In order for an end station to send packets to different VLA

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 48 Figure 5.26 – VLAN Configuration Screen 5. The VLANs will

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 49 on a Trunk Link are VLAN-tagged. A Hybrid Link can carry

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 5 1.0 Specifications OPERATIONAL CHARACTERISTICS: MAC Addre

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 50 Figure 5.27 – VLAN 802.1q Configuration Screen Group Config

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 51 3. You can change the VLAN group name and VLAN ID. 4. Once

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 52  Max Age (6-40) - the number of seconds a bridge waits wit

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 53 5.23.2 Port Configuration The RSTP port configuration allo

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 54 include STP mathematic calculation. False includes the STP m

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 55 Figure 5.32 – SNMP Configuration 5.24.2 Trap Configurati

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 56 Figure 5.33 – Trap Configuration 5.24.3 SNMPV3 Configurat

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 57 Configure SNMP V3 Group Table.  Security Name (User ID) –

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 58 Figure 5.34 – SNMP V3 Interface

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 59 5.25 QoS Configuration Use the QoS configuration menus to co

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 6 IEEE 802.1w IEEE 802.1d IEEE 802.1p IEEE 802.1q IEEE 802.

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 60 Figure 5.35 – QoS Configuration Port Based Priority Use th

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 61 TOS Configuration Use this section of the screen to set the

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 62 IGMP Configuration IGMP is disabled by default. Use the

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 63 The switch can be set as the ring master or slave. The ring

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 64 Figure 5.37 - X-ring Interface Note: When the X-ring func

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 65  Shared Key - set an encryption key to be used during auth

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 66 Figure 5.39 – 802.1x Per Port Setting Interface Miscellaneo

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 67 Figure 5.40 – 802.1x Miscellaneous Configuration 5.29 MAC Ad

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 68 Figure 5.41 – Static MAC Address Interface MAX Filtering By

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 69 Figure 5.42 – Filter MAC Address Interface All MAC Addresse

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 7 GSM2109: Dimensions: 8.5 x 5.5 x 1.75 in (216 x 140 x 45mm

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 70 Figure 5.43 – All MAC Address Interface 5.30 Power over Et

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 71  Enable State – PoE is enabled by default. You can chec

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 72  Keep current IP address setting – You may either keep the

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 73 6.0 CLI Commands To use the CLI commands, enter enable once

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 74 f)# command (with a specific interface) while in the global

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 75 Command Level Description Example description [system desc

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 76 Command Level Description Example [low ip] dhcpserver highi

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 77 Command Level Description Example server security telnet G

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 78 Command Level Description Example bandwidth type all I Set

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 79 Command Level Description Example interface configuration s

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 8 2.0 Package Contents Examine the shipping container for obvio

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 80 Command Level Description Example list separate by a comm

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 81 Command Level Description Example name [GroupName] vid [VID

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 82 Command Level Description Example [UntaggedVID] tag [Tagged

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 83 Command Level Description Example time determines how long

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 84 The following table lists the QoS Commands. Command Level De

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 85 no igmp-query G Disable IGMP query switch#no igmp-query

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 86 Command Level Description Example [System Location] snmp sy

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 87 Command Level Description Example [Group Name ] security-

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 88 Command Level Description Example [Group Name ] security-

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 89 The following table lists the commands for the 802.1x Securi

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 9 The ninth port can be used for 1000Base-SX fiber connectivity

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 90 Command Level Description Example server timeout. 8021x

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 91 The following table lists the SystemLog, SMTP and Events Com

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 92 Command Level Description Example [Systemlog| SMTP|Both] ev

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 93 Command Level Description Example [Start time] [End time]

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 94 Command Level Description Example [Control Port] X - ring h

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 95 7.0 Troubleshooting All Waters’ switching products are desig

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 96 800.328.2275 or email [email protected] for assistance.

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 97 repair products that are under warranty at no charge, and wi

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 98 8.0 Warranty Waters Network Systems’ Warranty Statement Wat

Waters Network Systems MS1008-2G-4POE/PSX1008-2G-4PoE User’s Manual Page 99 Systems. Returned product accompanied with the issued RMA n