Waters Network Systems ProSwitch-Quad Series Especificações Página 264

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 263
Virtual Private Networking Using IPSec and L2TP Connections
264
ProSAFE Gigabit Quad WAN SSL VPN Firewall SRX5308
2. Specify the following default lifetimes in seconds to match the configuration on the VPN
firewall:
Authentication (IKE), Default. Enter 3600 seconds.
Note: The default setting is 28800 seconds (8 hours). However, for a Mode
Config configuration, NETGEAR recommends 3600 seconds (1 hour).
Encryption (IPSec), Default. Enter 3600 seconds.
3. Select the Dead Peer Detection (DPD) check box, and configure the following DPD settings
to match the configuration on the VPN firewall:
Check Interval. Enter 30 seconds.
Max. number of entries. Enter 3 retries.
Delay between entries. Leave the default delay setting of 15 seconds.
4. Click Apply to use the new settings immediately, and click Save
to keep the settings for
future use.
The Mode Config configuration of the VPN client is now complete.
Test the Mode Config Connection
To test the Mode Config connection from the VPN client to the VPN firewall:
1. Right-click the system tray icon, and select Open tunnel ‘Tunnel_ModeConfig’.
Figure 173.
When the tunnel opens successfully, the Tunnel opened message displays above the
system tray, and the VPN client displays a green icon in the system tray.
Figure 174.
Vista de página 263
1 2 ... 259 260 261 262 263 264 265 266 267 268 269 ... 468 469

Comentários a estes Manuais

Sem comentários